Project Overview
| Location | Islamorada, FL (Florida Keys) |
|---|---|
| Project Type | Coral stone cladding, flooring & paver installation |
| Residence Size | 50,000 sq ft estate |
| Coral Stone Cladding | 20,000 sq ft |
| Flooring | 35,000 sq ft |
| Parking Area Pavers | 50,000 sq ft |
One of South Florida's Largest Coral Stone Installations
In Islamorada, in the heart of the Florida Keys, our team at Driveway & Paver Solutions is executing one of the largest natural-stone projects in our portfolio: a 50,000-square-foot estate clad and paved almost entirely in coral stone. The scope brings together 20,000 sq ft of coral stone cladding, 35,000 sq ft of flooring, and 50,000 sq ft of pavers across the parking area — a volume of stonework that very few hardscape contractors in the region are equipped to deliver.
A project of this magnitude is as much about logistics and engineering as it is about craftsmanship. Sourcing, staging and setting more than 100,000 square feet of natural stone on a single site demands tight material coordination, a large skilled crew, and disciplined quality control from the first pallet to the final joint. As an engineer-led company, that combination of planning and trade skill is exactly what we are built for.
Why Coral Stone in the Florida Keys
Coral stone is one of the most fitting materials for a coastal Keys estate. It is a naturally dense, fossil-rich limestone that stays comfortable underfoot in direct sun, offers natural slip resistance when wet, and carries the warm, organic character that defines high-end South Florida architecture. For a waterfront environment exposed to salt air, intense sun and heavy seasonal rain, coral stone delivers a finish that is both beautiful and built to endure.
Using the same stone for the exterior cladding, the flooring and the parking pavers creates a seamless, monolithic look across the entire property — interior to exterior, ground level to facade. Achieving that continuity at scale requires careful sorting and blending of the stone so color and texture read consistently across every surface.
Engineered for Scale and Coastal Conditions
- Planning and material coordination: A project measured in tens of thousands of square feet starts with detailed take-offs, staged deliveries and a layout plan so the right stone reaches the right area at the right time.
- Base and substrate preparation: Every surface — cladding substrate, flooring slab and paver base — is prepared and stabilized for long-term performance under South Florida's coastal and wind-load conditions.
- Stone setting at volume: A large, skilled crew sets the cladding, flooring and pavers to consistent alignment, joint width and elevation, with continuous quality checks across each zone.
- Finishing and protection: Joints, edges and transitions are detailed, and the stone is finished and protected so the estate is ready for the demands of a coastal Keys setting.
What This Project Says About Our Capability
Most residential hardscape contractors top out at a few thousand square feet per job. An installation of this size — a 50,000 sq ft residence with over 100,000 sq ft of combined coral stone cladding, flooring and pavers — demonstrates that Driveway & Paver Solutions can plan, staff and deliver estate- and commercial-scale stonework to a premium standard, while still bringing the same engineering rigor to a standard residential driveway or pool deck.
Project Photos
Coral Stone Project FAQs
What is coral stone cladding?
Coral stone cladding is natural fossil-rich limestone applied to exterior walls, columns and facades. It adds authentic texture and a warm, tropical character while standing up well to coastal sun, salt air and humidity, which makes it a popular choice for high-end South Florida and Florida Keys homes.
Is coral stone good for flooring and pavers?
Yes. Coral stone stays cooler underfoot than many materials in direct sun, offers natural slip resistance when wet, and wears beautifully over time. Using it for cladding, flooring and pavers together creates a continuous, cohesive look across an entire property.
Can you handle large-scale stone installations?
Absolutely. As an engineer-led company we plan the logistics, staffing and quality control required for projects ranging from a single residential driveway to estate- and commercial-scale installations measured in tens of thousands of square feet.
Planning a Coral Stone or Large-Scale Project?
Whether you are designing an estate clad in natural stone or upgrading a driveway, patio or pool deck, Driveway & Paver Solutions brings engineer-led planning and premium coral stone and paver installation to every project across South Florida.
Contact us today for a free consultation and estimate and let our team help you bring your project to life.